• <acronym id="6y1cy"></acronym>

      1. <track id="6y1cy"></track>
      2. <p id="6y1cy"></p>
      3. <bdo id="6y1cy"></bdo>
        
        

        <p id="6y1cy"></p>

        <track id="6y1cy"><ruby id="6y1cy"></ruby></track>

        咨询热线: 13896006908

        Contact us 联系我们

        重庆丰正机械有限公司

        联系人:朱经理

        手机:13896006908

        电话:023-67188505

        传真:023-67188506

        地址:重庆市渝北区回兴工业园区兰馨大道2号

        可调多轴器

        (中切削)U型方型可调多轴器

        (Medium cutting)Type U square shaft multi-spindle tool

        ◎方型可调式多轴器结构与圆型相同。工作孔距如属直线或长方型万向多轴器,以免移位量太大损害万向节接头寿命。使用方法与圆型相同。

        (尽量配合工作之孔距坐标,设计齿轮箱结构即定鏜孔位)

        ◎The structure of the square shaft multi-spindle tool is the same as the structure of the round shaft multi-spindle tool.This multi-spindle tool is suitable for the straight line or the rectangular working hole.When using,don't move too much to reduce the lifetime of the cardan joint,The usage is also the same as the round shaft one.

        (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

        咨询热线:

        13896006908

        在线咨询
        规格参数

        ※万向节注意事项:

        1调整时不能超过规定的角度15度

        2如超过此极限心轴易磨损或断裂

        3工作时应经常加润滑油脂

        ※Note of cardan Joint

        1.Do not set the angle to more than the specifled l5 degrees.

        2.If the limit is exceeded,the shaft will be easy to wear or break.

        3.During work,lubrication should be added frequently.

        注:ER8和C5最小间距为13,ER11和C6最小间距为18,ER16和C9最小间距为26,ER20和C12最小间距为28

        SU100×165

        SU120×200

        SU120×300

        SU160×450

        SU220×360

        SU250×500

        SU170X200

        SU300X400

        SU400X550

        SU450X550

        SU150X800

        SU300X1000

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        ER8/5

        ERll/7

        ERl6/10

        ER20/13

        C5/5

        C6/6

        C9/9

        C12/12

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        13

        18

        26

        28

        100×165

        120×200

        120×300

        160×450

        220×360

        250×500

        170×200

        300×400

        400×550

        450×550

        150×800

        300×1000

        2-8

        2-12

        4-16

        4-16

        6-14

        4-18

        2-12

        4-16

        4-18

        4-18

        4-18

        4-18

        扫一扫

        重庆丰正机械有限公司

        在线咨询

        咨询热线:023-67188505

        QQ咨询 QQ咨询
        少妇群交换BD高清国语版,亚洲中文无码MV,亚洲一区二区三区不卡国产,亚洲精品无码MⅤ在线观看 毛成片1卡2卡3卡4卡视频 国产精品亚洲А∨天堂网不卡 欧美人妻少妇精品视频专区 国内揄拍高清国内精品对白 亚洲另类无码专区丝袜 中文字幕亚洲无线码一区女同 亚欧无码AV在线观看 无码AV在线A√AV在线 中文字字幕在线乱码 欧美性色黄大片手机版 VA天堂亚洲网站在线看 人妻中文字系列无码专区 亚洲av综合色区无码一区 国产成人A级毛片 久久久WWW成人免费看片