• <acronym id="6y1cy"></acronym>

      1. <track id="6y1cy"></track>
      2. <p id="6y1cy"></p>
      3. <bdo id="6y1cy"></bdo>
        
        

        <p id="6y1cy"></p>

        <track id="6y1cy"><ruby id="6y1cy"></ruby></track>

        咨询热线: 13896006908

        Contact us 联系我们

        重庆丰正机械有限公司

        联系人:朱经理

        手机:13896006908

        电话:023-67188505

        传真:023-67188506

        地址:重庆市渝北区回兴工业园区兰馨大道2号

        可调多轴器

        (中切削)U型圆型可调多轴器

        (Medium cutting)Type U round shaft multi-spindle tool

        ◎本体结构利用齿轮箱配合万向节头所组成,容易调整加工孔距不受齿轮所限制,节省调整的时间,也少有死角的限制,适合加工接近圆周分布孔的工作,是可调式中最容易操作使用的规格。为保万向节头之寿命,移动范围不得超过15度,等于垂直之前後左右30mm以内。

        (尽量配合工作之孔距坐标,设计齿轮箱结构即定镗孔位)The distance of hole will be easy to control and not to be restricted by gears.

        ◎The basic frame consists of gear case and cardan joint.The distance of hole will be easy to control and not to be restricted by gears.The set up time is thus saved and it is mostly free of dead angles.It is very suitable for working of round holes and is the easiest tooperate among the adjustable type.To ensure the lifetime of the cardan joint,the moving range should be confined within 15 degrees,which means within a distance of 30mm to the vertical status.

        (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

        咨询热线:

        13896006908

        在线咨询
        规格参数

        ※万向节注意事项:

        1调整时不能超过规定的角度15度

        2如超过此极限。心轴易磨损或断裂

        3工作时应经常加润滑油脂

        ※Note of cardan Joint

        1.Do not set the angle to more than the specifled l5 degrees.

        2.If the limit is exceeded,the shaft will be easy to wear or break.

        3.During work,lubrication should be added frequently.

        型号 Type

        SU80

        SU110

        SU165

        SU200

        SU250

        SU300

        筒夹规格Collet/

        最大钻孔能力

        Max.Drilling Capacity

        D4

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ER11/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        转速比

        Gear Ratio

        1∶1

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        最小距离(二轴间)

        Lowest Distance(Two Spindle)

        10

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        最大轴心范围

        Max.Range of Centers

        80

        110

        165

        200

        250

        300

        轴数Spindle

        2-4

        2-6

        2-10

        4-12

        4-12

        4-14

        扫一扫

        重庆丰正机械有限公司

        在线咨询

        咨询热线:023-67188505

        QQ咨询 QQ咨询
        少妇群交换BD高清国语版,亚洲中文无码MV,亚洲一区二区三区不卡国产,亚洲精品无码MⅤ在线观看 毛成片1卡2卡3卡4卡视频 国产精品亚洲А∨天堂网不卡 欧美人妻少妇精品视频专区 国内揄拍高清国内精品对白 亚洲另类无码专区丝袜 中文字幕亚洲无线码一区女同 亚欧无码AV在线观看 无码AV在线A√AV在线 中文字字幕在线乱码 欧美性色黄大片手机版 VA天堂亚洲网站在线看 人妻中文字系列无码专区 亚洲av综合色区无码一区 国产成人A级毛片 久久久WWW成人免费看片